Hello.
I converted some sounds and songs to source hl2dm, but they are still having some weird intereferences. I think I did follow the convertion part of the manual well and it should be ok, I even tried diferent bit rates, Project rates, stereo and mono, and I concluded there's not much choice in them, so they must be ok, since the files play and they play well, except for the interferences.
Any idea of what is doing this?
Edit: I searched the forums but didn't find anything about it. Only ignored the topics titled like "I have a problem", while searching.
Sounds play with some interference.
Forum rules
Read this before posting in this section
Read this before posting in this section
Re: Sounds play with some interference.
Have you read this topic:
http://www.hldj.org/forums/viewtopic.php?f=6&t=14
I'm not sure what you mean by "interference", if you mean "crackly", "crunchy" or "grungy", it's likely due to clipping, which the above link should help with. Also, sample rate, bits, and channels cannot be altered, they must be set as specified by the manual.
http://www.hldj.org/forums/viewtopic.php?f=6&t=14
I'm not sure what you mean by "interference", if you mean "crackly", "crunchy" or "grungy", it's likely due to clipping, which the above link should help with. Also, sample rate, bits, and channels cannot be altered, they must be set as specified by the manual.
Re: Sounds play with some interference.
hmm, I missed that one. Thx. I'll check it out.